Primer | NAX-ACC
NAX-ACC is a resin-based primer that is used as a substrate to improve adhesion. It is suitable for priming internal and external building surfaces such as: gypsum, concrete, wood, ceramic, and stone walls.
Applications
NAX-ACC can be used as a primer on concrete (old and new), cement, and plaster surfaces before applying subsequent coats. It is also compatible with NAX-CB (Axon’s intumescent cement-based coating) and other fire-resistant cement coatings available on the market.
Key Features
- High penetration
- Easy to apply
- Environmentally friendly
- Increases adhesion
- Non-flammable
- Dilutable with water
- Suitable for both interior and exterior use
Surface Preparation
The surface must be clean, dry, and free of dirt, dust, oil, grease, or other contaminants. Light sanding with abrasive materials may be necessary. Thoroughly clean the surface before application.
For more information, please refer to the user manual (AG).
Instructions for Use
The amount of NAX-ACC to use depends on the surface and its porosity. The following table shows the recommended ratio of NAX-ACC to the desired coating:
| Application Type | Ratio with Waterproof Coating |
|---|---|
| Waterproofing a surface | 2:1 |
| Mixing with plaster | 2:1 |
| Mixing with cement | 2:1 |
| Mixing with sand | 2:1 |
| Mixing with fire-resistant cement coating | 20:1 |
| *For waterproofing surfaces, you can mix NAX-ACC with water at a ratio of 2:1 (2 parts water and 1 part NAX-ACC). The dilution ratio will affect the waterproofing quality. | |
| **The amount of NAX-ACC to use will depend on the specific application and desired thickness. For example, 1 liter of NAX-ACC can cover an area of 2 to 5 square meters. |
| اطلاعات فنی |
######################## |
|---|---|
| درصد جامد |
30% ± 5 |
| چگالی |
1 g/cm3 ± 0.05 |
| ویسکوزیته |
1000 – 1500 Poise |
| pH |
7 – 8 |
| کمک حلال (VOC) |
0% |
| نقطه اشتعال |
غیر قابل اشتعال |
| دمای نگهداری |
25 °C |
| ماندگاری |
6 ماه(@ 25 °C) |
| بسته بندی |
سطل (20 L) |
| رنگ |
شفاف |
| جزئیات کاربرد |
################################# |
| روش استفاده |
پیستوله / ایرلس، قلم مو، غلطک |
| دمای سطح |
10 °C – 40 °C |
| نقطه شبنم |
13 °C – 43 °C |
| رقیق کننده / حلال |
آب |
| اندازه نازل (اینچ / 1000) |
15 – 19 |
| فشار نازل (حداقل) |
150 bar / 2100 psi |
| ضریب پوشش دهی |
210 g/m2 (@ 100 µm) |
| ضخامت فیلم تر |
60 – 80 µm |
| ضخامت فیلم خشک |
30 – 40 µm |
