Pool Paint | NAX-WP

Applications

This product creates a seamless, waterproof layer on surfaces such as roofs, balconies, terraces, swimming pools, and bathrooms.

Key Features

• Non-toxic
• Easy to apply
• Environmentally friendly
• Waterproof
• Non-flammable
• High adhesion
• Scratch-resistant

Surface Preparation

The surface must be clean, dry, and free of any dirt, dust, oil, grease, or other contaminants. Light sanding with abrasive materials may be necessary. Thoroughly clean the surface before application.

For more information, please refer to the user manual (AG).

Instructions for Use

To enhance waterproofing performance, adhesion, and optimal bonding, the NAX-WM component (from Axon) can be applied as a primer in a 0.07 mm layer, followed by a 0.1 mm layer of NAX-WP.

Mix NAX-WP with water at a ratio of 10:5.1 (powder to water). Gradually add the powder to the water while continuously stirring to create a homogeneous mixture without air bubbles. Avoid over-mixing. The prepared product has a shelf life of approximately 30 minutes at 23°C and 50% relative humidity.