Fire-Resistant Wood Finish (Clear) | NAX-FPT
This product is a two-component, clear epoxy-based lacquer. NAX-FPT is a high-performance fire-resistant lacquer that significantly increases the fire resistance of wooden structures, protecting them from direct flames and fire.
It also offers high resistance to mechanical factors such as abrasion and scratching.
Uses
Specifically designed as a fire-resistant reaction coating for wooden structures. NAX-FPT is suitable for ceilings and walls made of wood in residential buildings, theaters, event halls, and other locations where fire resistance is required in emergency situations.
Standards
BS EN 13823 BS EN 13501-1 National Standard 11621
Key Features
High mechanical strength Quick installation Water resistant Non-flammable High resistance to microorganisms High adhesion High chemical resistance
Surface Preparation
The surface should be dry and free of any dust, oil, grease, syrup, etc. Light sanding with appropriate abrasive material is recommended before use to remove any debris.
For more information, please refer to the instruction manual (AG).
Usage Guide
First, mix part A thoroughly. Then, mix 20 kg of part A with 5 kg of part B and stir for 5 minutes with a mixer.
Ensure that the first two coats are completely dry before applying the next coat.
| اطلاعات فنی |
############### |
|---|---|
| درصد جامد |
54% ± 5 |
| چگالی |
2.5 g/cm3 ± 0.05 |
| ویسکوزیته |
76.2 Sec |
| pH |
5-6 |
| کمک حلال (VOC) |
10% – 15% |
| نقطه اشتعال |
اشتعال پذیر |
| دمای نگهداری |
10 °C – 45 °C |
| ماندگاری |
6ماه (@ 25 °C) |
| بسته بندی |
جزء A، 20 کیلوگرمی-جزء B، 5 کیلوگرمی |
| رنگ |
بی رنگ |
| جزئیات کاربردی |
############### |
| روش استفاده |
پیستوله / ایرلس، قلم مو، غلطک |
| دمای سطح |
25 °C – 40 °C |
| نقطه شبنم |
27 °C – 43 °C |
| رقیق کننده / حلال |
10 % xylene |
| اندازه نازل (اینچ / 1000) |
19 – 27 |
| فشار نازل (حداقل) |
200 bar / 2900 psi |
| ضریب پوشش دهی |
2.5 kg/m2 (@ 1000 µm) |
| نسبت اختلاط |
1:4 |
| ضخامت فیلم تر |
300 – 500 µm |
| ضخامت فیلم خشک |
280 – 480 µm |
