Product Description
One Pack Waterproof Membrane has been specifically designed for water pound, pools and balconies, water features, planter boxes and all wet areas within commercial and residential buildings. One Pack Waterproof Membrane forms a cement coating over cracks and irregular surfaces.
Recommended Use
This product creates an integrated, seamless and moisture-resistant layer on roofs, balconies, terraces, pools and bathrooms.
Outstanding Characteristics
- Nontoxic
- Easy to apply
- Environmentally friendly
- Water Pressure Resistance
- Non-flammable
- Superior adhesion
- Abrasion Resistance
Surface Preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry, and free from any contamination.
Refer to the Application Guide (AG) for additional information.
User Manual
After substrate cleaning, to reach a better result for adhesion and bonding you can use the NAX-WM as a primer with 0.07mm first and then use the mix of NAX-WP powder with water and make another 0.1mm concreate layer.
Mixing & Pot Life
One Pack Waterproof Membrane is a 10:1.5 powder and water membrane system. Always add the powder to the water with continuous mixing using a slow speed drill, until the membrane is smooth, consistent and free of air voids. Avoid over mixing of the product. One Pack Waterproof Membrane has a pot life of approximately 30 minutes at 23°C and 50% relative humidity.
