Product Description
Two Pack Waterproof Membrane has been specifically designed for balconies, water features, planter boxes and all wet areas within commercial and residential buildings. Two Pack Waterproof Membrane forms a cement coating over cracks and irregular surfaces.
Part A (fiber powder) Part B (liquid) Part C (primer)
Recommended Use
This product creates an integrated, seamless and moisture-resistant layer on roofs, balconies, terraces and bathrooms.
Outstanding Characteristics
- Nontoxic
- Easy to apply
- Environmentally friendly
- Quick installation
- Non-flammable
- Superior adhesion
Surface Preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry, and free from any contamination.
Refer to the Application Guide (AG) for additional information.
User Manual
After cleaning the surface, for better results, apply the desired adhesion and bonding of the produced primer with a thickness of 0.07 mm and then mix component A with component B and apply another resistant layer with a thickness of 0.1 mm.
Mixing & Pot Life
- First, add 2 kg of water to half a kilogram of component C (primer) and mix at low speed until 2.5 kilograms of primer is ready.
- Use component B (liquid), add 7 kilograms of water to obtain 9 kilograms of liquid. Gently mix 9 kg of liquid obtained from component B with 10 kg of component A (fiber powder) to obtain the final layer of the sealing membrane.
The finished product has approximately 30 minutes pot life at a temperature of 23 ° C and a relative humidity of 50%.
