-
Product Description
NAX-PTC is a two component, acrylic aliphatic isocyanate cured polyurethane topcoat.Recommended Use
As a protective finish coat for protection of structural steel in severely corrosive atmospheric environment where light- fastness and gloss retention, attractive appearance and high corrosion resistance are required such as chemical plants, pulp & paper mills, off-shore platforms, petroleum refineries and containers. Also, it can be used as topcoat on water-based intumescent fire resistive coatings to keep the foam structure of the coatings.Outstanding Characteristics
- Excellent corrosion resistance
- Easy to clean
- Superior adhesion
- Chemical resistance
- UV Resistant
Surface Preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry, and free from any contamination. Refer to the Application Guide (AG) for additional information. -
Technical Data
Solids by Volume 10% ± 5 Density 1.2 g/cm3 ± 0.05 Viscosity 2000 – 2500 Poise pH 6 – 7 VOC 3% – 4% Flash Point > 50 °C Shelfing Temp. 10 °C – 45 °C Shelf Life 6 month (@ 25 °C) Pot Life (After Mix) 30 – 45 min Package Bucket (20 kg, 5 kg) Color White Application Details
Application Method Air/Airless Spray, Brush, Roller Surface Temperature 10 °C – 40 °C Dew Point 13 °C – 43 °C Thinner / Cleaner Thinner Mixing Ratio 1 : 4 Nozzle Tip (inch/1000) 17 – 21 Nozzle Pressure (Min) 150 bar / 2175 psi Theoretical Spreading Rate 6.6 – 10 kg/m2 @ 100 µm Wet Film Thickness 100 – 120 µm Dry Film Thickness 80 – 100 µm -
Technical Data Sheet (English)
- Type:
- Datasheet
- Language:
- English
- File Type:
- Version:
- File Size:
- 200.69 KB
- Updated:
- 19 September, 2023
- Download Count:
- 19
