Skip to main content
  • Product Description

    NAX-ACC is a polymer resin, used as a substrate to increase the adhesion of surfaces. This product is suitable for building interior and exterior surfaces such as plaster, concrete, wooden, ceramic and stone walls.

    Recommended Use

    Can be used as a primer on cement surfaces (old and new cement), concrete surfaces and plaster surfaces before applying the next layer. In order to reduce the caring time, it can be mixed with concrete, waterproof membranes, sand and cement. It can be used as a primer for NAX-CB or other fireproof cement coating products available in the market

    Outstanding Characteristics

    • High permeability in pores
    • Easy to install
    • Eco-friendly
    • Increased adhesion
    • Non-flammable
    • Can be diluted with water
    • Can be used inside and outside the building

    Surface Preparation

    The desired surface must be dry and free from any kind of pollution, dust, oil, grease, sap, etc. Before use, it is better to use light sanding with abrasive materials and clean the surface of any materials. For more information, refer to the manual (AG).

    User Manual

    The amount of NAX-ACC consumption varies according to the desired level and its permeability according to the following table:
    Type of use Mixing Ratio
    Surface sealing * 2 : 1
    Mixing with plaster ** 2 : 1
    Mixing with cement ** 2 : 1
    Mixing with sand 2 : 1
    Mixing with fireproof cement coating** 20 : 1
    * For sealing surfaces, NAX-ACC can be mixed with water in a ratio of 2:1 (2 units of water and 1 unit of NAX-ACC). Obviously, dilution has an effect on the sealing quality.
    ** Depending on the conditions of consumption and desired thickness, the amount of consumption is different. Also, each 1 liter of NAX-ACC product is enough to seal an area of 2 to 5 square meters.
  • Technical Data

    Solids by Volume 30% ± 5
    Density 1 g/cm3 ± 0.05
    Viscosity 1000 – 1500 Poise
    pH 7 – 8
    VOC 0%
    Flash Point Non-Flammable
    Shelfing Temp. 25 °C
    Shelf Life 6 month (@ 25 °C)
    Package Gallons (20 L)
    Color Transparent

    Application Details

    Application Method Air/Airless Spray, Brush, Roller
    Surface Temperature 10 °C – 40 °C
    Dew Point 13 °C – 43 °C
    Thinner / Cleaner Water
    Nozzle Tip (inch/1000) 15 – 19
    Nozzle Pressure (Min) 150 bar / 2100 psi
    Theoretical Spreading Rate 210 g/m2 (@ 100 µm)
    Wet Film Thickness 60 – 80 µm
    Dry Film Thickness 30 – 40 µm
  • Type:
    File Type:
    File Size:
    293.42 KB
    18 September, 2023
    Download Count:

    File Type:
    File Size:
    208.23 KB
    18 September, 2023
    Download Count:

    Download Catalog

    You can use the link below to download the full catalog of Nano Axon.

    Share Us

    Fire Retardants