Nax-WP

Waterproofing paint

One Pack Waterproof Membrane has been specifically designed for water pound, pools and balconies , water features, planter boxes and all wet areas within commercial and residential buildings. One Pack Waterproof Membrane forms a cement coating over cracks and irregular surfaces.

´ Recommended Use

This product creates an integrated, seamless and moisture-resistant layer on roofs, balconies, terraces, pools and bathrooms.

´ Mixing and Pot life

One  Pack Waterproof Membrane is a 10:1.5 powder and water membrane system. Always add the powder to the water with continuous mixing using a slow speed drill , until the membrane is smooth, consistent and free of air voids. Avoid over mixing of the product. One  Pack Waterproof Membrane has a pot life of approximately 30 minutes at 23°C and 50% relative humidity.

´ Application guide

After substrate cleaning, to reach a better result for adhesion and bonding you can use the NAX-WM as a primer with 0.07mm first and then use the mix of NAX-WP powder with water and make another 0.1mm concreate layer.

´ Outstanding characteristics

  • Nontoxic
  • Easy to apply
  • Environmentally friendly
  • Water Pressure Resistance
  • Non-flammable
  • Superior adhesion
  • Abrasion Resistance

´ Surface preparation

To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry, and free from any contamination.

Refer to the Application Guide (AG) for additional information.